 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Unity Opto Technology Co., Ltd. Technical Data SideLEDs MSL-510ITG PRELIMINARY 10/17/2003 Features l l Package : True-Green micro-sideview PLCC-2 package with diffuse silicon. Feature of the device : extremely wide viewing angle ideal for backlighting and coupling in light guides l l l l l l l Wavelength : Typical : 525nm Viewing angle : Lambertian Emitter (X : 120o / Y : 120o) Technology : InGaN with diffuse silicon Grouping parameter : luminous intensity , Chromaticity Assembly methods : suitable for all SMT assembly methods Soldering methods : IR reflow soldering Taping : 8-mm tape with 3500/reel, 180mm Applications l Backlighting : LCD Display, Key pads 1 Package Dimensions Unit : mm (inch) Notes : 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.1 unless other specified Recommended Solder Patterns Method of Taping / Polarity and Orientation Packing unit 3500/reel Notes : 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.1 unless other specified 2 Selection Guide Viewing Angle Luminous Intensity Part Number mcd Bin R MSL-510ITG S T Min. 280 390 560 Forward Voltage Device Type Min. MSL-510ITG VF (Volts) @IF = 20mA Typ. 3.3 Max 4.0 Min. Typ. 320 460 640 Max. 390 560 780 Reverse Current IR (A) @ VR = 5V Typ. Max 10 Max 50 Thermal Resistance RJ-S (oC/W) 515 525 533 120 120 Min. nm Typ. Max. x Typ. Wavelength 2 1/2 (Degrees) y Typ. Maximum Ratings Parameter Operating Temp. range Storage Temp. range Forward current Peak forward current Reverse Voltage Power dissipation Soldering Temperature Symbol T OP T stg IF I FM VR P tot Tsid Value -30 ~ +85 -40 ~ +100 30 100 5 120 Reflow Soldering : 260 C, for 10 sec o Unit o o C C mA mA V mW Hand Soldering : 350oC, for 3 sec IFP Conditions : Pulse Width <10msec and Duty < 1/10 3 Relative Spectrum Emission Irel = f (l), TA = 25oC, IF = 20mA V(l) = Standard eye response curve Relative Luminous Intensity 1.0 0.5 0.0 450 490 530 570 Wavelength (nm) FIG.1 RELATIVE LUMINOUS INTERSITY VS. WAVELENGTH Forward Current IF = f (VF) TA = 25 C (mA) IF 30 25 20 15 10 5 0 0 1 2 3 4 VF 5 (V) o Relative Luminous Intensity IV/IV (20mA) = f (IF) TA = 25oC 2.0 1.8 IV 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 20 30 40 IF 50 (mA) Forward Voltage (V) FIG.2 FORWARD CURRENT VS. FORWARD VOLTAGE Forward Current IF (mA) FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Ambient Temperature VS. Allowable Forward (mA) IF 40 Radiation Characteristic Irel = f (q) 0o 10o 20o 30o Y X 30 40o 20 1.0 0.9 10 TA temp. ambient 0 0 20 40 60 80 T 100 (oC) 0.7 0.5 0.3 0.1 0.2 0.4 0.6 0.8 50o 60o 70o 80o 90o X Y Ambient Temperature TA (oC) FIG.4 FORWARD CURRENT VS. AMBIENT TEMPERATURE FIG.5 RADIATION DIAGRAM 4 IR Reflow Soldering Profile Lead Solder Temp Pre heating 120-150oC 2-5oC / sec. 60sec. Max. Above 200oC 120sec. Max. 2-5oC / sec. 240oC Max. 10sec. Max. Time 5 Unity SideLEDs Bin Codes Category Code T B Luminous Intensity Group MSL-510ITG R S T 280-390 390-560 560-780 Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of +/- 11% Dominant Wavelength (in nanometers) @ IF=20mA B C BIN A P/N minimum maximum minimum maximum minimum maximum ITG 515 521 521 527 527 533 Wavelength groups are tested at a current pulse duration of 25 ms and an accuracy of 1nm 6 Tape Dimensions REEL Dimensions Items Leader Cover Tape Specifications Cover tape shall be longer than 400mm without carrier tape Remarks The end of the carrier tape shall be adhered on the cover tape The orientation of tape shall be as shown The end of the tape shall be inserted into a slit of the hub Carrier Tape There shall be more than 40 empties Trailer There shall be more than 40 empties 7 Surface Mount Moisture Sensitivity Specifications 1. Controlling Moisture Unity Opto Technology, in its design of packing materials and packing methods, takes into consideration the susceptibility of some Unity packages to moisture induced damage. The risk of this damage is caused when the LED lens plastic encapsulation material is exposed to increases or decreases in the Relative Humidity of the surrounding environment. Such damage may include delamination between the die and the LED lens plastic encapsulation material, which may result in open connections due to broken wire bonds. Moisture in the package having reached a critical level will fracture the package in order to escape when exposed to peak temperature conditions, typical in soldering practices. Therefore, the control of moisture levels in the LED package is critical to reduce the risk of moisture-induced failures. Please follow JEDEC-STD-033A standards for handling moisture sensitive devices. 2. Packaging SMD devices: Unity packages all SMD devices into dry pack bags (moisture barrier bags). Unity includes a desiccant pouch in each bag. Testing confirms that the desiccant pouch greatly reduces the presence of moisture by maintaining the environment in the bag, thus protecting the devices during shipment and storage. 3. Handling Dry Packed Parts Upon receipt, the bags should be inspected for damage to ensure that the bag's integrity has been maintained. Inspection should verify that there are no holes, gouges, tears, or punctures of any kind that may expose the contents of the bag. To open the bag, simply cut across the top of the bag as close to the original seal as possible being careful not to damage the contents. Once open the desired quantity of units should be removed and the bag resealed. If the bag is left open longer than 2 hours, the desiccant pouch should be replaced with a dry desiccant and the bag should be sealed immediately to avoid moisture damage. 8 |
Price & Availability of MSL-510ITG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |